John Deere 140 Specifications
If you are looking for a versatile tractor that is suitable for different tasks, then the John Deere 140 could be for you. In this article, we’re going to take a detailed look at the specs of this tractor and give you a full review to help you decide.
John Deere 140 Specifications
Here is a table with the most important technical data of the John Deere 140:
| TECHNICAL DATA | Specification |
|---|---|
| Engine power | 14 HP |
| Type of fuel | Gasoline |
| Transmission | 3-speed |
| drive | chain drive |
| Lifting power | 205 kgf |
| weight | 330 kg |
| Tire size (front/rear) | 4.00-8/5.00-8 |
This data gives you a good idea of what the John Deere 140 has to offer. The tractor has a reasonable engine power of 14 hp and is powered by a petrol engine. The gearbox has three gears and is driven by a chain drive. The John Deere 140 also has a decent lift capacity of 205 kgf and a weight of 330 kg. The tire size is 4.00-8/5.00-8.
engine
Here is a table with the specifications of the John Deere 140 engine:
| Specification | Value |
|---|---|
| Number of cylinders | 1 |
| Displacement | 387 cm³ |
| Performance | 14 HP |
| Cooling | Air-cooled |
| Starters | Electric starter |
| Ignition | contact ignition |
The engine of the John Deere 140 is a single-cylinder petrol engine with a displacement of 387 cm³. The tractor has an output of 14 hp and is started with an electric starter. The engine is air-cooled and uses contact ignition.
Reducers
Here is a table with the specifications of the John Deere 140 reduction gear:
| Specification | Value |
|---|---|
| Type | planetary gears |
| Translation | 1:2.25 |
| Oil capacity | 1.1L |
The John Deere 140 uses a planetary gear as a reduction gear. The gear ratio is 1:2.25 and the gearbox has an oil capacity of 1.1 L.
Power
Here is a table with the performance specifications of the John Deere 140:
| Specification | value |
|---|---|
| Engine power | 14 hp |
| lifting capacity | 205 kgf |
| Top speed | 5.6 km/h |
The John Deere 140 has an engine power of 14 hp and an impressive lifting capacity of 205 kgf. The maximum speed is 5.6 km/h, which is sufficient for a tractor of this size and power.
hydraulic system
Here is a table with the specifications of the John Deere 140 hydraulic system:
| Specification | Value |
|---|---|
| Pump capacity | 3.6 l/min |
| Pressure | 140 kgf/cm² |
| Oil capacity | 6.6L |
The John Deere 140 has a hydraulic system with a pump capacity of 3.6 l/min and a pressure of 140 kgf/cm². The hydraulic system has an oil capacity of 6.6 L.
Dimensions and weights
Here is a table with dimensions and weights of the John Deere 140:
| Specification | Value |
|---|---|
| Length | 2140 mm |
| width | 840 mm |
| Height | 1300mm |
| Ground clearance | 150mm |
| Weight | 330 kg |
The John Deere 140 is 2140 mm long, 840 mm wide and 1300 mm high. The ground clearance is 150 mm and the weight of the tractor is 330 kg.
cabin
The John Deere 140 does not have a cabin, only an open driver’s seat. However, the driver’s seat is padded to increase driving comfort.
tires
Here is a table with the specifications of the tires of the John Deere 140:
| specification | Front | Back |
|---|---|---|
| tire size | 4.00-8 | 5.00-8 |
| Tire tread | Studs | Studs |
The John Deere 140 has 4.00-8 tires at the front and 5.00-8 tires at the rear. Both tires have a lug tread pattern to allow the tractor to move better on uneven terrain.
Maintenance
As with any tractor, it is important that you regularly service the John Deere 140 to ensure optimal performance and longevity. Here are some key points to watch out for:
- Check the oil level regularly and change the oil according to the manufacturer’s instructions.
- Check the air filter regularly and clean or replace it if necessary.
- Check the fuel filter regularly and replace it if necessary.
- Check the spark plug regularly and replace it if necessary.
- Lubricate all moving parts regularly.
Prices for spare parts
Here is a table with the prices of some important spare parts for the John Deere 140:
| spare part | Price |
|---|---|
| Air filter | €15 |
| Oil filter | €10 |
| Spark plug | €5 |
| Fuel filter | €12 |
Please note that these are only estimates and that actual prices may vary depending on the manufacturer and retailer.
Operating experience
I have personal experience with the John Deere 140 and I can say that it is a reliable and versatile tractor. It is easy to use and suitable for a variety of tasks such as lawn mowing, snow clearing and gardening. Fuel efficiency is also very good, which is a big plus.
Comparison with other models
To better understand the John Deere 140, it is helpful to compare it with other John Deere models. Here is a table with the specifications of four other John Deere tractors:
| model | Engine power (hp) | Lifting capacity (kgf) | Weight (kg) |
|---|---|---|---|
| John Deere 102 | 12 | 179 | 282 |
| John Deere 116 | 16 | 204 | 375 |
| John Deere 212 | 12 | 272 | 460 |
| John Deere 314 | 14 | 314 | 565 |
As you can see, the John Deere 140 is between the John Deere 102 and the John Deere 116 in terms of engine power and lifting capacity. However, the John Deere 140 has a lower weight than the John Deere 116 and the John Deere 212.
Advantages and disadvantages
Here are the advantages and disadvantages of the John Deere 140 at a glance:
Benefits
- Reliable and versatile
- Good fuel efficiency
- Easy to use
Disadvantages
- No cabin
- Less lifting capacity than other models
costs
The cost of a new John Deere 140 varies by dealer and region. However, it is possible to find used models at a cheaper price. Here are the average prices for new and used John Deere 140 tractors:
- New John Deere 140: from €6,000
- Used John Deere 140: from €3,000
FAQ
How fast can the John Deere 140 go?
The John Deere 140 has a maximum speed of 5.6 km/h.
Can the John Deere 140 be used with a trailer?
Yes, the John Deere 140 can be used with a trailer. However, the maximum load capacity of the trailer should not exceed the tractor’s lifting capacity.
How often should the oil in the John Deere 140 be changed?
The oil in the John Deere 140 should be changed according to the manufacturer’s instructions. Typically, it is recommended to change the oil every 50 hours of operation or once a year, whichever comes first.
Can the John Deere 140 be equipped with different attachments?
Yes, the John Deere 140 can be equipped with various attachments such as snow ploughs, road sweepers or lawn mowers. However, it is important to ensure that the implement is compatible with the tractor’s lift capacity.
Can the John Deere 140 be used on rough terrain?
Yes, the John Deere 140 is well suited for use on rough terrain. The chain drive and the lug tread of the tires offer good traction and maneuverability on different surfaces.
Conclusion
The John Deere 140 is a reliable and versatile tractor, suitable for various tasks. With an engine power of 14 hp, a lift capacity of 205 kgf and a weight of 330 kg, it offers reasonable performance for a tractor of its size. Although it has no cab and has less lift capacity than other models, the John Deere 140 is a good choice for homeowners and small businesses looking for a reliable and easy-to-use tractor.