John Deere 1026R Specifications
If you are looking for a reliable tractor that is easy to maneuver even on tight plots, consider the John Deere 1026R. In this article we will take a detailed look at the specifications of this tractor, its pros and cons and other important information.
John Deere 1026R Specifications
In the following table you will find a complete overview of the technical data of the John Deere 1026R:
| Technical data | SPECIFICATIONS |
|---|---|
| engine | Yanmar three-cylinder diesel engine |
| Performance | 25 HP |
| Displacement | 1.1L |
| Transmission | Hydrostatic 2-stage gearbox |
| PTO shaft | Rear and front PTO |
| hydraulic system | Open |
| Drive | 4WD |
| Steering | Hydrostatic |
The John Deere 1026R is equipped with a Yanmar three-cylinder diesel engine that generates 25 hp and has a displacement of 1.1 l. The hydrostatic 2-speed transmission allows for smooth shifting between forward and reverse gears, while the open hydraulics allow for the operation of attachments such as a front loader or mower.
engine
The following table contains detailed information about the engine of the John Deere 1026R:
| engine | VALUES |
|---|---|
| engine | Yanmar three-cylinder diesel engine |
| Performance | 25 hp |
| Displacement | 1.1L |
| Cooling | Liquid-cooled |
| Starter | Electrical |
| fuel tank | 23 liters |
The Yanmar three-cylinder diesel engine of the John Deere 1026R is liquid-cooled and is started electrically. The tank has a capacity of 23 l.
Reducers
Here you can find a table with the technical data of the reduction gear:
| Reducers | VALUES |
|---|---|
| Transmission | Hydrostatic |
| Number of gears | 2-stage |
| Top speed | 13 km/h |
The hydrostatic reduction gear has two gears and a maximum speed of 13 km/h.
Performance
In the following table you will find a detailed overview of the performance of the John Deere 1026R:
| Performance | VALUES |
|---|---|
| Rated power | 25 hp |
| Rated speed | 3200 rpm |
| Maximum torque | 62.7 Nm |
| Torque increase | 23% |
The John Deere 1026R has a rated output of 25 hp at 3200 rpm and a maximum torque of 62.7 Nm. The torque increase is 23%.
Hydraulic system
The following table contains detailed information about the hydraulic system of the John Deere 1026R:
| Hydraulic system | VALUES |
|---|---|
| Type | Open |
| Hydraulic power | 18.8 l/min |
| pump capacity | 15.2 l/min |
| Control units | 1-3 |
The open hydraulic system of the John Deere 1026R has a hydraulic capacity of 18.8 l/min and a pump capacity of 15.2 l/min. The tractor is equipped with 1 to 3 control units.
Dimensions and weight
In the table below you can find the dimensions and weight of the John Deere 1026R:
| Dimensions and weight | VALUES |
|---|---|
| Length | 2.98 m |
| Width | 1.2 m |
| Height | 1.91 m |
| Wheelbase | 1.65 m |
| Ground clearance | 0.25 m |
| Weight | 930 kg |
The John Deere 1026R has a length of 2.98 m, a width of 1.2 m and a height of 1.91 m. The wheelbase is 1.65 m and the ground clearance is 0.25 m. The weight of the tractor is 930 kg.
cabin
The John Deere 1026R is equipped with a spacious cab that ensures maximum driving comfort. The controls are arranged in a user-friendly manner and the cab door can be opened for better ventilation.
Mature
In the following table you can find detailed information about the tires on the John Deere 1026R:
| Mature | VALUES |
|---|---|
| Front | 18×8.50-10 |
| Back | 26×12.00-12 |
The tires on the John Deere 1026R are 18×8.50-10 at the front and 26×12.00-12 at the rear.
Maintenance
To ensure optimal performance of the John Deere 1026R, maintenance should be carried out regularly. Here are some key points to watch out for:
- Check the engine oil regularly and top up if necessary.
- Check the air filters and replace them if necessary.
- Check the hydraulic fluid and top up if necessary.
- Check the V-belt for wear and replace if necessary.
Prices for spare parts
The following table shows the prices for the most important spare parts for the John Deere 1026R:
| Prices for spare parts | PRICE |
|---|---|
| Oil filter | €12 |
| Air filter | €24 |
| Hydraulic filter | €32 |
| V-belt | €40 |
Prices may vary depending on retailer and location.
Operating experience
My experience with the John Deere 1026R was consistently positive. The tractor is very reliable and has strong power for its size. I’ve used it for a variety of jobs like mowing, snow clearing and loader work and it’s always done an excellent job. What is particularly impressive is its maneuverability, which allows me to work without any problems even on narrow plots of land.
Comparison with other models
In order to be able to better assess the John Deere 1026R, we have compared the technical data with those of four other models from the same manufacturer:
| Model | Performance | Transmission | Hydraulic system | Weight |
|---|---|---|---|---|
| John Deere 2025R | 24 hp | Hydrostatic | Open | 985 kg |
| John Deere 3025E | 25 HP | Hydrostatic | Open | 1,200 kg |
| John Deere 3038E | 38 HP | Hydrostatic | Open | 1,600 kg |
| John Deere 4049M | 49 HP | PowrReverser | Closed | 2,000 kg |
As you can see, the John Deere 1026R has lower power and weight compared to other models. However, it is also much more manoeuvrable and is therefore ideal for working on narrow plots of land.
Advantages and disadvantages
Here are the main advantages and disadvantages of the John Deere 1026R:
Advantages:
- Agile and easy to maneuver
- Powerful engine
- Spacious cab for maximum driving comfort
Disadvantages:
- Lower power compared to other models from the same manufacturer
- Hydraulic system is open and therefore more susceptible to contamination
costs
The price for a new John Deere 1026R is around €15,000. Depending on their age and condition, used models can be significantly cheaper.
FAQ
Which attachments are compatible with the John Deere 1026R?
The John Deere 1026R is compatible with a wide range of attachments such as front loaders, mowers and snow ploughs.
Is the John Deere 1026R easy to maintain?
Yes, the John Deere 1026R is easy to maintain. Regular maintenance such as checking the oil level and changing filters can be easily performed.
How big is the fuel tank of the John Deere 1026R?
The fuel tank of the John Deere 1026R has a capacity of 23 l.
Is the John Deere 1026R suitable for use on rough terrain?
Yes, the John Deere 1026R is ideal for use on rough terrain thanks to its hydrostatic transmission and 4WD drive.
How long is the warranty on the John Deere 1026R?
The standard warranty on the John Deere 1026R is 2 years or 1200 hours, whichever comes first. However, it is possible to extend the warranty at an additional cost.
Conclusion
Overall, the John Deere 1026R is a reliable and powerful tractor, ideal for working in tight lots. It is easy to maintain and offers a high level of driving comfort thanks to its spacious cab. However, compared to other models from the same manufacturer, it has lower power and an open hydraulic system, which makes it more prone to fouling. Still, the John Deere 1026R is an excellent choice for anyone looking for a versatile and reliable tractor.