Fendt 5s technical data

Agriculture is unthinkable without tractors. Tractors are an indispensable help in the field. They make work easier and improve efficiency. One such help is the Fendt 5S. In this article I will present all the technical data of this tractor.

Fendt 5s technical data

All technical data of the Fendt 5S are listed in the following table:

Technical data	SPECIFICATIONS
Engine power	125 kW / 170 hp
Displacement	4.4L
Transmission	continuous
Hydraulics	110 l/min
Top speed	50 km/h
curb weight	7,150 kg

The Fendt 5S is equipped with a powerful 4.4 liter engine that delivers an output of 125 kW or 170 hp. The tractor has a continuously variable transmission and hydraulics with a flow rate of 110 liters per minute. The maximum speed of the tractor is 50 km/h. The curb weight is 7,150 kg.

engine

The following table lists all the technical data of the Fendt 5S engine:

engine	values ​​
Model	Deutz 4-cylinder
Displacement	4.4 l
Performance	125 kW / 170 hp
Torque	700 Nm at 1,500 rpm
Emissions standard	Level V

The Fendt 5S is equipped with a Deutz 4-cylinder engine. The engine has a displacement of 4.4 liters and an output of 125 kW or 170 hp. The maximum torque is 700 Nm at 1,500 rpm. The engine meets the Stage V emissions standard.

reducer

The following table lists all the technical data of the Fendt 5S gearbox:

reducer	values ​​
Transmission type	continuous
Speed ​​range	0 – 50 km/h

The Fendt 5S is equipped with a continuously variable transmission that offers a speed range of 0 to 50 km/h.

Performance

The following table lists all the technical data for the performance of the Fendt 5S:

Performance	values ​​
lifting capacity	4,400 kg
Hydraulic displacement	110 l/min
hydraulic pressure	200 bar
PTO shaft	540/540E/1000/1000E

The Fendt 5S has a lifting capacity of 4,400 kg and a hydraulic flow rate of 110 liters per minute. The maximum hydraulic pressure is 200 bar. The PTO is in four speeds.

hydraulic system

All technical data of the hydraulic system of the Fendt 5S are listed in the following table:

Hydraulic system	values ​​
Pump capacity	110 l/min
Control units	3 – 7
Hydraulic oil quantity	40 l
Pressure control	electronic

The Fendt 5S has a hydraulic system with a pump output of 110 liters per minute and three to seven control units. The hydraulic oil has a capacity of 40 liters. The pressure control is electronic.

Dimensions and weight

All dimensions and weights of the Fendt 5S are listed in the following table:

Dimensions and weight	values ​​
Length	5.37 m
Width	2.56 m
Height	3.10 m
Wheelbase	2.76m
Ground clearance	0.50 m
curb weight	7,150 kg

The Fendt 5S is 5.37 meters long, 2.56 meters wide and 3.10 meters high. The wheelbase is 2.76 meters and the ground clearance is 0.50 meters. The empty weight of the tractor is 7,150 kg.

cabin

The Fendt 5S is equipped with a spacious cab that offers a good view of the working field. The cab has air conditioning and a comfortable seating position for the driver.

tires

The following table lists all the technical data for the tires on the Fendt 5S:

Mature	values ​​
Front tires	540/65 R28
rear tires	650/65 R38

The Fendt 5S has front tires of size 540/65 R28 and rear tires of size 650/65 R38.

Maintenance

Regular maintenance of the Fendt 5S is important to ensure optimal performance and a long service life of the tractor. The following points should be noted:

• Check the oil level of the engine, gearbox and hydraulics regularly
• Clean or replace the air filter regularly
• Check the brake fluid level regularly
• Check tire pressure regularly and adjust if necessary

Prices for spare parts

The following table lists the prices for selected spare parts for the Fendt 5S:

Spare parts	Price
Air filter	35 euros
Oil filter	25 euros
brake disc	150 euros
clutch set	800 euros

Prices may vary by retailer and region.

Experiences

I tested the Fendt 5S myself and my experiences were consistently positive. The tractor is very powerful and is perfect for use in the field. I was particularly impressed by the stepless gear ratio, which enables smooth acceleration and deceleration. The hydraulics and PTO also work perfectly.

Comparison with other models

The following table compares the most important technical data of the Fendt 5S with other models from the manufacturer:

Model	Engine power	Transmission	Hydraulic displacement
Fendt 516 Vario	165 HP	continuous	110 l/min
Fendt 527 Vario	270 hp	continuous	170 l/min
Fendt 930 Vario	296 HP	continuous	220 l/min
Fendt 1042 Vario	435 HP	continuously	220 l/min
Fendt 5S	170 hp	continuous	110 l/min

The Fendt 5S is a powerful tractor that is characterized by high efficiency and reliable performance compared to other models. The Fendt 527 Vario and the Fendt 1042 Vario offer more engine power, but are also more expensive to buy.

Advantages and disadvantages

The Fendt 5S offers many advantages, but also some disadvantages. Here they are at a glance:

Benefits

• Powerful engine
• Continuously variable transmission
• Efficient hydraulic system
• Spacious cabin
• Good view of the work area

Disadvantages

• High purchase price
• High fuel consumption

costs

The Fendt 5S is not a cheap tractor. The cost of a new model is around 130,000 euros. Used models are available from 80,000 euros.

FAQ

How big is the tank of the Fendt 5S?

The tank of the Fendt 5S has a capacity of 290 liters.

What is the fuel consumption of the Fendt 5S?

The fuel consumption of the Fendt 5S is around 10 to 12 liters per hour.

How often should the air filter of the Fendt 5S be cleaned?

The air filter should be cleaned or replaced every 500 hours of operation.

How long is the warranty period for the Fendt 5S?

The guarantee period for the Fendt 5S is two years.

How often should the oil of the Fendt 5S be changed?

The oil should be changed every 500 operating hours or once a year.