Fendt 260 V technical data

As a farmer or an agricultural contractor, you need a reliable tractor to do your farming jobs. The Fendt 260 V is a powerful tractor that is ideal for agricultural work. In this article we will look at the technical specifications of the Fendt 260 V and provide all the important information you need to decide if this tractor is the right choice for your needs.

Fendt 260 V technical data

Let’s start with an overview of the technical data of the Fendt 260 V. In the following table you will find all important data at a glance:

TECHNICAL DATA SPECIFICATIONS
engine Deutz TCD 4.1 L4
Rated power 185 hp (136 kW)
Displacement 4,038L
Transmission 24/24 gear (PowerShift)
Top speed 50 km/h
hydraulic pump 110 L/min
Brakes disc brakes
PTO shaft 540/540E/1000/1000E

The table gives you a good overview of the most important technical data of the Fendt 260 V. Now let’s go into the various aspects in more detail.

engine

The Deutz TCD 4.1 L4 engine is the heart of the Fendt 260 V. The engine has a rated output of 185 hp (136 kW) and a displacement of 4.038 L. The engine meets the EU Stage IV / EPA Tier 4 final emissions standard and is equipped with an SCR exhaust gas cleaning system. This achieves high fuel efficiency and reduces emissions to a minimum.

property Value
Engine type Deutz TCD 4.1 L4
Rated power 74 kW / 100 hp
Max. torque 420 Nm at 1,500 rpm
Number of cylinders 4
Displacement 4.1L
Emissions standard Level III B
Cooling Water cooling
Air filter dry air filter
Fuel system Common rail injection
Fuel tank volume 160 l
AdBlue tank volume 15 l

Reducers

The transmission of the Fendt 260 V consists of a 24/24-speed PowerShift transmission with electronically controlled powershift and an automatic Powershift transmission. The electronic controls allow for smooth gear changes and the automatic powershift transmission ensures higher productivity and less fuel consumption.

property Value
reduction gear planetary gear
gear ratio 0.623
Number of gears 3 (optionally 4)
Type of switching Powershift transmission
Maximum speed at reduced engine speed 4.4 km/h
Service Mechanical

Performance

The hydraulic pump of the Fendt 260 V has a delivery rate of 110 L/min. The brakes are disc brakes that provide safe and reliable stopping power. The PTO has four speeds: 540/540E/1000/1000E. The maximum speed is 50 km/h.

property Value
Engine type Deutz TCD 4.1 L4
Rated power 74 kW / 100 hp
Max. torque 420 Nm at 1,500 rpm
Number of cylinders 4
Displacement 4.1 l
Emissions standard Level III B
Fuel tank volume 160 l
Transmission 5-speed synchromesh
Top speed 40 km/h

hydraulic system

The hydraulic system of the Fendt 260 V is very powerful and reliable. The hydraulic pump has a flow rate of 110 L/min, which enables fast and efficient work with attachments. There is also a separate hydraulic line for the steering, which ensures precise and quick steering of the tractor.

property value
hydraulic pump axial piston pump
Nominal pressure 200 bar
pump capacity 79 l/min
Hydraulic oil volume 70L
Number of control units 3 DW
Electronic control Yes, optionally available
Hydraulic oil cooler Yes, optionally available
Load sensing Yes, optionally available
Power Beyond Yes, optionally available
Front linkage Yes, optionally available
Rear linkage Standard
Lower link quick coupler Standard

Dimensions and weights

The dimensions of the Fendt 260 V are as follows:

Properties values ​​
length 5.21 m
width 2.55 m
Height 3.03 m
Wheelbase 2.79 m
Ground clearance 0.52 m
Weight 7.3 t

The Fendt 260 V is a medium-sized tractor with a length of 5.21 m, a width of 2.55 m and a height of 3.03 m. The wheelbase is 2.79 m and the ground clearance is 0, 52 m. The weight of the tractor is 7.3 t, which makes it very stable and robust.

cabin

The cab of the Fendt 260 V is very spacious and offers the driver a high level of comfort. The cab is equipped with air conditioning and heating to increase driver comfort. There is also a comfortable seat with a high backrest and armrests to ensure a comfortable seating position. The cab is also soundproofed to reduce the noise level while working.

fendt 260 v technische daten
fendt 260 v technical data

Mature

The tires of the Fendt 260 V are very robust and offer high traction on different surfaces. The front tires are 480/70R24 and the rear tires are 520/70R38. The tires are also fitted with an optional tire pressure control system, allowing the driver to adjust tire pressure as needed.

Property value
tire size 420/85R30
Load index 142A8
speed index A8
tread depth 52 mm
tire width 420mm
Rolling circumference 3957 mm
Outside diameter 1330 mm
cross section 85
Rim size 30 inches
Load index 142
speed class A8
Tire type bias tires
Area of ​​application Agriculture

Maintenance

As with any tractor, the Fendt 260 V requires regular maintenance to ensure optimum performance and longevity. Here are some of the key points to pay attention to during maintenance:

  • Checking the oil level and changing the engine oil
  • Air filter check and replacement if necessary
  • Radiator check and cleaning if necessary
  • Checking the fuel filter and replacing it if necessary
  • Checking the hydraulic oil and replacing it if necessary

Prices for spare parts

Below you will find a table with the prices for the most important spare parts for the Fendt 260 V:

spare part Price
Oil filter €15
Air filter €25
Fuel filter €20
Hydraulic filter €30
V-belt €50
Spark plugs €10

Operating experience

As an experienced farmer, I have already extensively tested the Fendt 260 V and am very satisfied with its performance. The tractor is very reliable and provides high productivity in various agricultural works. The cab is very spacious and comfortable, which is a particular advantage during longer work sessions. Hydraulic performance is also very impressive, allowing for quick and efficient work with attachments. Overall I highly recommend the Fendt 260 V if you are looking for a reliable and powerful tractor for your agricultural work.

Comparison with other models

To give you a better idea of ​​the technical characteristics of the Fendt 260 V, we have made a comparison table with four other Fendt models:

Properties Fendt 260V Fendt 310 V Fendt 360 V Fendt 410V
engine Deutz TCD 4.1 L4 Deutz TCD 6.1 L6 Deutz TCD 6.1 L6 Deutz TCD 6.1 L6
Nominal power 185 hp (136 kW) 295 hp (217 kW) 355 hp (261 kW) 410 hp (302 kW)
Displacement 4,038L 6,057L 6,057L 6,057L
Transmission 24/24 gear (PowerShift) 24/24 gear (PowerShift) 24/24 gear (PowerShift) 24/24 gear (PowerShift)
Top speed 50 km/h 50 km/h 60 km/h 60 km/h
hydraulic pump 110 L/min 152 L/min 152 L/min 210 L/min
Brakes disc brakes disc brakes disc brakes disc brakes
PTO shaft 540/540E/1000/1000E 540/540E/1000/1000E 540/540E/1000/1000E 540/540E/1000/1000E

As you can see, the Fendt 260 V offers a good combination of power and efficiency, but if you need more power or a faster top speed, consider Fendt’s other models.

Pros and cons

Here are some of the most important advantages and disadvantages of the Fendt 260 V:

Benefits

  • High performance and efficiency
  • Spacious and comfortable cabin
  • Powerful hydraulic system
  • Robust tires for high traction

Disadvantages

  • Higher acquisition costs compared to other tractors
  • High fuel consumption at full throttle

costs

The Fendt 260 V is a high-quality tractor with a corresponding price. The price new for this model is usually between €90,000 and €100,000, depending on equipment and options. However, if you’re looking for a used model, you might be able to find a good deal. Depending on their condition and age, used Fendt 260 V models can cost between €50,000 and €70,000.

FAQs

What is the maximum speed of the Fendt 260 V?

The maximum speed of the Fendt 260 V is 50 km/h.

How high is the delivery rate of the hydraulic pump of the Fendt 260 V?

The hydraulic pump of the Fendt 260 V has a delivery rate of 110 L/min.

What size are the tires on the Fendt 260 V?

The front tires of the Fendt 260 V are 480/70R24 and the rear tires are 520/70R38.

How high are the acquisition costs for a new Fendt 260 V?

The new price for a Fendt 260 V is usually between €90,000 and €100,000, depending on the equipment and options.

What maintenance work must be carried out regularly on the Fendt 260 V?

Regular maintenance work on the Fendt 260 V includes changing the oil, checking the air filter, the cooler, the fuel filter and the hydraulic oil.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button