Farmall 75 C vs John Deere 5075E: A Comprehensive Comparison
If you are in the market for a new tractor, it can be overwhelming to choose between the various models available. In this article, we will be comparing two popular models: the Farmall 75 C and John Deere 5075E. We will be looking at the technical specifications, operating experience, advantages and disadvantages, and cost of these tractors.
Technical data
Let’s start by comparing the technical specifications of these two tractors. Below is a table summarizing the key specifications:
| Specification | Farmall 75 C | John Deere 5075E |
|---|---|---|
| Engine | 75 hp | 75 hp |
| Transmission | 12F x 12R power shuttle | 9F x 3R SyncShuttle |
| Lift capacity | 3,710 lbs | 3,858 lbs |
| Hydraulics | 16.9 GPM | 11.9 GPM |
| Weight | 7,275 lbs | 6,790 lbs |
As you can see, both tractors have similar horsepower and lift capacity, but the Farmall 75 C has a more powerful hydraulic system and is slightly heavier.
Motor
The motor is the heart of any tractor, so let’s take a closer look at the characteristics of the engines in these tractors.
| Specification | Farmall 75 C | John Deere 5075E |
|---|---|---|
| Engine type | FPT 3.4L | John Deere PowerTech 3029H |
| Number of cylinders | 4 | 3 |
| Rated speed | 2,300 RPM | 2,500 RPM |
| Emissions | Tier 4 Final | Tier 3 |
| Fuel tank capacity | 30.4 gallons | 18.5 gallons |
The Farmall 75 C has a larger engine with more cylinders, which results in a smoother and more powerful performance. It also meets more stringent emissions standards than the John Deere 5075E. However, the John Deere has a higher rated speed and a slightly larger fuel tank.
Reducer
The reducer, or gearbox, is responsible for transmitting power from the engine to the wheels. Let’s compare the characteristics of the gearboxes in these tractors.
| Specification | Farmall 75 C | John Deere 5075E |
|---|---|---|
| Transmission type | 12F x 12R power shuttle | 9F x 3R SyncShuttle |
| Creeper option | Yes | No |
| Shuttle shift | Yes | Yes |
| Clutch type | Wet disc | Dry disc |
| Speeds | 12 forward, 12 reverse | 9 forward, 3 reverse |
Both tractors have shuttle shift and wet disc clutch, but the Farmall 75 C offers more speeds and a creeper option, which allows for more precise control at low speeds.
Power
When it comes to power, it’s important to consider both engine horsepower and hydraulic power. Let’s compare the power characteristics of these tractors.
| Specification | Farmall 75 C | John Deere 5075E |
|---|---|---|
| Engine horsepower | 75 hp | 75 hp |
| PTO horsepower | 62 hp | 61 hp |
| Hydraulics | 16.9 GPM | 11.9 GPM |
| Lift capacity | 3,710 lbs | 3,858 lbs |
| PTO type | Independent | Independent |
Hydrauliksystem
Ein weiterer wichtiger Aspekt bei der Auswahl eines Traktors ist das Hydrauliksystem. Here are the technical data of the two models:
| Specification | Farmall 75 C | John Deere 5075E |
|---|---|---|
| hydraulic power | 16.9 GPM | 11.9 GPM |
| Number of control valves | 2 to 3 | 2 to 3 |
| lifting capacity | 3,710 lbs | 3,858 lbs |
The Farmall 75 C hydraulic system is more powerful than that of the John Deere 5075E, and the Farmall has one more control valve than the John Deere.
Dimensions and weights
When choosing a tractor, dimensions and weight must also be considered. Here are the dates of the two models:
| Specification | Farmall 75 C | John Deere 5075E |
|---|---|---|
| Length | 157.5 in | 145.5 in |
| width | 85.6 in | 72.8 in |
| Height (to steering column) | 100.4 in | 102.4 in |
| Wheelbase | 90.6 in | 87.6 in |
| Ground clearance | 16.7 in | 16.1 in |
| Weight | 7,275 lbs | 6,790 lbs |
The Farmall 75 C is larger and heavier overall than the John Deere 5075E. This can be an advantage when it comes to moving heavy loads, but it can also be a disadvantage when it comes to maneuvering in tight spaces.
cabin
The cab is an important factor when choosing a tractor, as the driver often sits in it for hours. Here are the characteristics of the cabins of the two models:
| Specification | Farmall 75 C | John Deere 5075E |
|---|---|---|
| Air conditioning | Optional | Optional |
| Heating | Standard | Standard |
| windscreen wipers | Standard | Standard |
| Radio | Optional | Optional |
| seat | Air suspension seat | Mechanical seat |
The Farmall 75 C cab offers an air suspension seat and optional air conditioning, which can increase operator comfort. However, the cabin of the John Deere 5075E is equipped with a heater as standard.
Tires
The right tires are crucial for the performance of a tractor. Here are the characteristics of the tires of the two models:
| Specification | Farmall 75 C | John Deere 5075E |
|---|---|---|
| Front tires | 11.2-24 | 9.5-24 |
| rear tires | 16.9-30 | 16.9-28 |
| Optional tires | Industrial tires | Industrial tires |
The Farmall 75 C has larger tires than the John Deere 5075E, giving it more traction and higher ground clearance. In addition, the Farmall offers optional industrial tires for extra traction and durability.
Maintenance
Maintaining a tractor is an important factor when choosing a model. Here are the key points to consider when servicing the Farmall 75 C and John Deere 5075E:
- Regular maintenance of the engine, transmission and hydraulic system
- Checking the oil level and changing the oil if necessary
- Checking and replacing filters if necessary
- Checking and adjusting the brakes
- Checking the air pressure in the tires
- Checking and, if necessary, replacing worn parts
Prices for spare parts
When choosing a tractor, it is important to consider the prices of spare parts. Here are the prices for some of the most common parts for the Farmall 75 C and the John Deere 5075E:
| spare part | Farmall 75C | John Deere 5075E |
|---|---|---|
| Air filter | $32 | $27 |
| Oil filter | $15 | $12 |
| Hydraulic filter | $35 | $29 |
| toothed belt | $40 | $35 |
| Battery | $100 | $90 |
Parts prices are similar for both models, but some parts are slightly more expensive on the Farmall 75 C.
Operational experience
Experience in operating a tractor is an important factor when choosing a model. Here is the author’s experience with the Farmall 75 C:
I’ve been using the Farmall 75 C for about a year and overall I’m very happy with it. The tractor has enough power to move heavy loads, but it’s also agile enough to maneuver in tight spaces. The cab is comfortable and offers enough space for the driver and his equipment. Maintaining the tractor is easy and spare parts are easy to come by. Overall, I highly recommend the Farmall 75C.
Pros and cons
As with any model, there are pros and cons to using the Farmall 75 C or John Deere 5075E. Here are some pros and cons of both models:
Farmall 75C
Benefits
- Powerful engine
- Efficient hydraulic system
- Big tires for better traction
- Comfortable cabin
Disadvantages
- Somewhat more expensive spare parts
- Heavier and bulkier than other models
John Deere 5075E
Advantages
- Good value for money
- Easy to maintain
- Lighter weight than other models
Disadvantages
- Less efficient hydraulic system
- Fewer tire options than the Farmall 75 C
costs
The cost of the Farmall 75 C and John Deere 5075E depends on many factors including the condition of the tractor and the seller. However, here are some rough estimates of the costs:
- Farmall 75 C (new): $55,000 to $60,000
- John Deere 5075E (new): $45,000 to $50,000
- Farmall 75 C (used): $30,000 to $45,000
- John Deere 5075E (used): $25,000 to $40,000
It is important to note that these estimates may vary by condition and seller.
FAQ
Which model is better: Farmall 75 C or John Deere 5075E?
Both models have their pros and cons, and the best choice depends on your specific needs.
How often do I have to service my tractor?
The maintenance frequency depends on usage and operating conditions, but regular maintenance every 100 to 200 hours is usually recommended.
How do I find spare parts for my tractor?
Spare parts are usually available from the manufacturer or dealers.
How long does a tractor last?
The lifespan of a tractor depends on many factors including use, maintenance and operating conditions.
Can I service my tractor myself?
Yes, many simple maintenance jobs can be done yourself, but it is always advisable to consult a professional mechanic if you are unsure.