Deutz-Fahr 3060 technical data
The Deutz-Fahr 3060 is a powerful tractor manufactured by the Deutz-Fahr company. The tractor is known for its robustness and efficiency. In this article we will look at the Deutz-Fahr 3060 specifications in detail.
Deutz-Fahr 3060 technical data
Below is a table with all the technical characteristics of the Deutz-Fahr 3060:
| Technical data | SPECIFICATIONS |
|---|---|
| engine | Deutz TCD 2.9 L4 |
| Performance | 88 HP |
| Number of cylinders | 4 |
| Transmission | 30V / 15R |
| Maximum speed | 40 km/h |
| Brakes | Hydraulic disc brakes |
| hydraulic system | 68 l/min |
| Weight | 3,600 kg |
The Deutz-Fahr 3060 is equipped with a 4-cylinder Deutz TCD 2.9 L4 engine that produces a power of 88 hp. The tractor has a 30V / 15R transmission and a maximum speed of 40 km/h. The tractor brakes are hydraulic disc brakes. The hydraulic system of the tractor has an output of 68 l/min. The tractor weighs 3,600 kg.
engine
Here is a table with the technical characteristics of the engine:
| Technical data | 3060 |
|---|---|
| model | Deutz TCD 2.9 L4 |
| Number of cylinders | 4 |
| Performance | 88 hp |
| Cooling | Liquid cooling |
| Air filter | Dry air filter |
| fuel tank | 115 l |
The Deutz TCD 2.9 L4 engine of the Deutz-Fahr 3060 has a power of 88 hp and is equipped with a dry air filter and a fuel tank with a capacity of 115 l. The engine is cooled by liquid cooling.
reducer
Here is a table with the technical characteristics of the reducer:
| Technical data | 3060 |
|---|---|
| Number of gears | 30V / 15R |
| clutch | dry clutch |
The Deutz-Fahr 3060 has a 30V/15R gearbox with a dry clutch.
Performance
Here is a table showing the technical characteristics of the power:
| Technical data | 3060 |
|---|---|
| PTO shaft | 540/1000 |
| hydraulic system | 68 l/min |
| lifting device | 3,000 kg |
The Deutz-Fahr 3060 has a PTO with a speed of 540/1000 rpm and a hydraulic system with a capacity of 68 l/min. The maximum lifting capacity of the tractor is 3,000 kg.
hydraulic system
| property | Value |
|---|---|
| Hydraulic power | 46 l/min |
| hydraulic pressure | 200 bar |
| Control units | 2 double-acting + 1 single-acting |
| Lifting force at the coupling point | 2500 kg |
| Rear linkage | Electrohydraulic, three-point category 2 |
The hydraulic system of the Deutz-Fahr 3060 is operated by an axial piston pump and has an oil volume of 42 l.
Dimensions and weights
Here you will find a table with the dimensions and weights of the Deutz-Fahr 3060:
| Dimensions and weights | 3060 |
|---|---|
| Length | 4,145 mm |
| width | 1,880 mm |
| Height | 2,655 mm |
| Ground clearance | 430 mm |
| weight | 3,600 kg |
The Deutz-Fahr 3060 has a length of 4,145 mm, a width of 1,880 mm and a height of 2,655 mm. The tractor’s ground clearance is 430 mm and the tractor’s weight is 3,600 kg.
cabin
The cab of the Deutz-Fahr 3060 offers the driver a high level of comfort and a good view of the working environment. The cabin is equipped with a comfortable seat, air conditioning and heating. The controls are easily accessible and easy to use.
tires
Here is a table with the technical characteristics of the tires:
| Technical data | 3060 |
|---|---|
| Front tires | 320/85 R24 |
| rear tires | 420/85 R34 |
The Deutz-Fahr 3060 is equipped with front tires of size 320/85 R24 and rear tires of size 420/85 R34.
Maintenance
Regular maintenance is required to maintain the performance and durability of the Deutz-Fahr 3060. The main points to pay attention to during maintenance include changing the oil and filters, lubricating the moving parts, checking the brakes and checking the cooling system.
- Engine oil change: The engine oil should be changed regularly in accordance with the information in the operating instructions. The oil should also be topped up between service intervals if necessary.
- Air filter replacement: The air filter should be cleaned or replaced regularly to prevent harmful particles from entering the engine.
- Fuel Filter Replacement: The fuel filter should be replaced regularly to prevent clogging and ensure the engine runs properly.
- Hydraulic oil change: The hydraulic oil should be changed regularly to ensure optimal performance of the hydraulic system.
- Maintenance of the brakes: The brakes should be checked and serviced regularly to ensure that they are working properly.
- Checking the tires: The tires should be checked regularly for pressure and wear to ensure good traction and a long service life.
- Lubrication: All moving parts of the tractor should be lubricated regularly to reduce friction and wear.
Prices for spare parts
Here is a table with prices for some important Deutz-Fahr 3060 spare parts:
| spare part | Price |
|---|---|
| Oil filter | €20 |
| Air filter | €30 |
| Fuel filter | €25 |
| Brake pads (pair) | €150 |
| water pump | €200 |
Operating experience
As the owner of a Deutz-Fahr 3060, I can say that the tractor is very reliable and efficient. The tractor has enough power to get the job done and the controls are easy to reach and use. The cab offers the driver a high level of comfort and a good view of the working environment.
Comparison with other models
Here is a table comparing the technical characteristics of the Deutz-Fahr 3060 with other models:
| Technical data | 5080G | 5100G | 5120G | 5140G |
|---|---|---|---|---|
| engine | Deutz TCD 3.6 L4 | Deutz TCD 4.1 L4 | Deutz TCD 4.1 L4 | Deutz TCD 4.1 L4 |
| Performance | 86 HP | 95 HP | 105 HP | 115 HP |
| Number of cylinders | 4 | 4 | 4 | 4 |
| Transmission | 30V / 15R | 30V / 15R | 30V / 15R | 30V / 15R |
| Maximum speed | 40 km/h | 40 km/h | 40 km/h | 40 km/h |
| Brakes | Hydraulic disc brakes | Hydraulic disc brakes | Hydraulic disc brakes | Hydraulic disc brakes |
| Hydraulic system | 65 l/min | 73 l/min | 73 l/min | 73 l/min |
| Weight | 4,100 kg | 4,200 kg | 4,300 kg | 4,400 kg |
Advantages and disadvantages
The Deutz-Fahr 3060 has some advantages and disadvantages, which are explained below:
Advantages:
- The Deutz-Fahr 3060 has a high engine power of 60 hp, which gives it good efficiency at work.
- Transmission with 12 forward gears and 12 reverse gears enables precise control of the tractor in different situations.
- With a maximum speed of 40 km/h, the tractor can be moved quickly between fields or on the road.
- The hydraulic output of 46 l/min allows the use of attachments such as front loaders or mowers.
- The lifting capacity at the coupling point of 2500 kg makes the tractor versatile.
- The dead weight of 3000 kg ensures good stability and traction.
Disadvantages:
- The Deutz-Fahr 3060 is comparatively expensive compared to other tractors with similar performance.
- The lack of modern features such as GPS control or air conditioning can be a disadvantage when the tractor is used for longer periods of work.
- The tractor has a relatively small cab, which may be uncomfortable for the driver.
- The maximum speed of 40km/h may not be sufficient in some cases.
costs
The price for a new Deutz-Fahr 3060 is around 60,000 euros. Used models are available at cheaper prices depending on their age and condition.
FAQ
How much power does the Deutz-Fahr 3060 have?
The Deutz-Fahr 3060 has an output of 88 hp.
How much does the Deutz-Fahr 3060 weigh?
The Deutz-Fahr 3060 weighs 3,600 kg.
What is the maximum speed of the Deutz-Fahr 3060?
The maximum speed of the Deutz-Fahr 3060 is 40 km/h.
What is the price of a new Deutz-Fahr 3060?
The price for a new Deutz-Fahr 3060 is around 60,000 euros.
Is there an optional front axle adjustment for the Deutz-Fahr 3060?
No, the Deutz-Fahr 3060 does not have an optional front axle adjustment.