Claas Axion 930 technical data
The Claas Axion 930 is a powerful tractor used in agriculture. This article describes the technical data, properties and experiences with the Claas Axion 930.
Claas Axion 930 technical data
engine
| TECHNICAL DATA | SPECIFICATIONS |
|---|---|
| Engine power | 215 kW / 290 hp |
| Displacement | 6.8L |
| Cylinder | 6 |
| Emissions standard | Tier 4 final |
The Claas Axion 930 has a 6-cylinder engine with an output of 215 kW or 290 hp. The engine has a displacement of 6.8 liters and meets the Tier 4 final emissions standard.
Reducers
| property | value |
|---|---|
| Gear type | Stepless |
| Top speed | 50 km/h |
| PTO power | 190 HP |
| Number of gears | Unlimited |
The Claas Axion 930 has a continuously variable transmission and a top speed of 50 km/h. PTO power is 190 hp and there are unlimited gears.
Power
| property | Value |
|---|---|
| Rated power | 215 kW / 290 hp |
| Maximum power | 240 kW / 326 hp |
| Torque | 1,300 Nm |
The Claas Axion 930 has a rated output of 215 kW or 290 hp and a maximum output of 240 kW or 326 hp. The torque is 1,300 Nm.
hydraulic system
| property | Value |
|---|---|
| hydraulic pump | 220 l/min |
| Control units | Up to 7 |
| Lifting power | 11,400 kg |
The Claas Axion 930 has a hydraulic pump with an output of 220 l/min. Up to seven spool valves can be used and the maximum lift capacity is 11,400 kg.
Dimensions and weights
| property | value |
|---|---|
| Weight | 11,000 kg |
| Length | 5,780 mm |
| width | 2,780mm |
| Height | 3,400 mm |
The Claas Axion 930 has a weight of 11,000 kg and is 5,780 mm long, 2,780 mm wide and 3,400 mm high.
cabin
The cabin of the Claas Axion 930 is spacious and comfortable. The driver has a good view of the field and the controls are easily accessible.
Mature
The Claas Axion 930 is equipped with 600/70R30 tires at the front and rear. The tire profile is 154 A8 at the front and 173 A8 at the rear.
| property | Value |
|---|---|
| tire size | 710/70 R38 |
| Carrying capacity | 192A8/189B |
| speed class | A8/B |
| tread depth | 44 mm |
| overall diameter | 1877 mm |
| Width | 700mm |
| Rim width | 38 inches |
| Rolling circumference | 5624 mm |
| wheel load | 11000 kg |
| Tire pressure | 1.4 – 2.4 bar |
| Recommended rim | DW20B |
Maintenance
It is important that the Claas Axion 930 is serviced regularly to ensure optimal performance and a long service life. The following points should be observed during maintenance:
- Oil and air filters should be replaced regularly
- The hydraulic fluid should be topped up regularly
- The tires should be checked for damage and correct air pressure
- The engine should be checked regularly for performance and damage
Prices for spare parts
| spare part | Price |
|---|---|
| Oil filter | 25 euros |
| Air filter | 45 euros |
| hydraulic pump | 3,500 euros |
| Clutch kit | 700 euros |
The prices for spare parts for the Claas Axion 930 can vary depending on the manufacturer and dealer. An oil filter costs around 25 euros, an air filter around 45 euros and a hydraulic pump can cost up to 3,500 euros. A clutch kit usually costs around 700 euros.
Experience in action
The Claas Axion 930 is a powerful tractor that can be used in a variety of ways in agriculture. The tractor performs well and is very reliable. Particularly noteworthy are the spacious and comfortable driver’s area and the simple operation.
Comparison with other models
The following table compares the technical data of the Claas Axion 930 with four other Claas models.
| Model | Engine power | Top speed | Rated power |
|---|---|---|---|
| Claas Axion 930 | 215 kW / 290 hp | 50 km/h | 215 kW / 290 HP |
| Claas Axion 950 | 250 kW / 340 hp | 50 km/h | 250 kW / 340 hp |
| Claas Axion 970 | 276 kW / 375 hp | 50 km/h | 276 kW / 375 hp |
| Claas Axion 990 | 313 kW / 425 hp | 50 km/h | 313 kW / 425 hp |
The Claas Axion 930 has an engine power of 215 kW or 290 hp, a top speed of 50 km/h and a rated power of 215 kW or 290 hp. Compared to the other Claas models, the Axion 930 has a slightly lower output, but it is still a very powerful tractor.
Advantages and disadvantages
Advantages
- The Claas Axion 930 is very reliable and has a high performance.
- The cabin is spacious and comfortable.
- The tractor is easy to operate and has a good view of the field.
Disadvantages
- The Claas Axion 930 is comparatively expensive.
- The spare parts can be expensive.
- Continuously variable transmission may be unfamiliar to some users.
Cost
The price for a new Claas Axion 930 is around 180,000 euros. Used models are available from around 100,000 euros.
FAQ
What is the lifting capacity of the Claas Axion 930?
The maximum lifting capacity of the Claas Axion 930 is 11,400 kg.
What size tires does the Claas Axion 930 have?
The Claas Axion 930 is equipped with 600/70R30 tires at the front and rear.
What is the engine power of the Claas Axion 930?
The Claas Axion 930 has an engine power of 215 kW or 290 hp.
How many control units does the Claas Axion 930 have?
Up to seven control units can be used with the Claas Axion 930.
Is the Claas Axion 930 easy to use?
Yes, the Claas Axion 930 is very easy to use and has a good view of the field.
Conclusion
The Claas Axion 930 is a powerful tractor that can be used in a variety of ways in agriculture. The tractor performs well, is reliable and easy to operate. The cab is spacious and comfortable, and the controls are within easy reach. However, the Claas Axion 930 is comparatively expensive and the spare parts can also be expensive. Overall, the Claas Axion 930 is a good choice for farmers looking for a reliable and powerful tractor.