Case IH 840 Specifications
If you are looking for a powerful tractor for your farming needs, then the Case IH 840 may be the right choice for you. In this article, we will take a detailed look at the specs, features, and pros and cons of this tractor.
Case IH 840 Specifications
Here you will find a table with all technical data of the Case IH 840 tractor.
TECHNICAL DATA | SPECIFICATIONS |
---|---|
Engine power | 82 HP |
Max. torque | 309 Nm |
Transmission | 12 forward and 12 reverse gears |
Top speed | 40 km/h |
Hydraulic power | 55 l/min |
Lifting power | 3700 kg |
curb weight | 3375 kg |
Total weight | 6900 kg |
The Case IH 840 has an 82 hp engine and a 12-speed gearbox consisting of 12 forward and 12 reverse gears. The tractor can reach a maximum speed of 40 km/h and has a hydraulic capacity of 55 l/min and a lifting capacity of 3700 kg.
engine
The Case IH 840 has a 4-cylinder engine with an output of 82 hp and a maximum torque of 309 Nm. Here you will find a table with all the important data on the tractor engine.
Properties | values |
---|---|
Engine type | FPT F5C |
Displacement | 3.4L |
Number of cylinders | 4 |
Cooling | Water-cooled |
Type of fuel | Diesel |
Emissions standard | Tier III |
The Case IH 840 engine is an FPT F5C 4-cylinder engine with a power of 82 hp and a displacement of 3.4 liters. The engine is water-cooled and meets Tier III emissions standards.
reduction gear
The Case IH 840 has a 12-speed gearbox with 12 forward and 12 reverse gears. Here you will find a table with all important data on the tractor transmission.
Properties | values |
---|---|
Transmission type | Synchromesh |
Number of forward gears | 12 |
Number of reverse gears | 12 |
Top speed | 40 km/h |
PTO speed | 540/1000 rpm |
The Synchromesh transmission of the Case IH 840 has 12 forward and 12 reverse gears and can reach a maximum speed of 40 km/h.
Performance
Here you will find a table with all important data:
Performance characteristics | values |
---|---|
Max. speed | 40 km/h |
Hydraulic power | 55 l/min |
Lifting power | 3700 kg |
Fuel tank capacity | 95 l |
The Case IH 840 has a maximum speed of 40 km/h and a hydraulic output of 55 l/min. The tractor also has an impressive lift capacity of 3700 kg and a fuel tank with a capacity of 95 liters.
Hydraulic system
Here you will find a table with all important data on the hydraulic system of the Case IH 840 tractor.
Properties | values |
---|---|
hydraulic power | 55 l/min |
Number of control units | 2 |
Rear linkage | Electronically controlled |
Three-point suspension | Cat. I I |
The hydraulic system of the Case IH 840 has a hydraulic output of 55 l/min and 2 spool valves. The rear linkage is electronically controlled and the three-point linkage is classified as category II.
Dimensions and weights
Here you will find a table with all important data on the dimensions and weights of the Case IH 840 tractor.
Properties | values |
---|---|
total length | 4.24 m |
overall width | 2.20 m |
overall height | 2.77 m |
Wheelbase | 2.55 m |
curb weight | 3375 kg |
Total weight | 6900 kg |
The Case IH 840 has an overall length of 4.24 meters, an overall width of 2.20 meters and an overall height of 2.77 meters. The wheelbase is 2.55 meters and the curb weight of the tractor is 3375 kg, while the total weight is 6900 kg.
Cabin
The cab of the Case IH 840 tractor offers the driver a high level of comfort and good visibility. The cab of the Case IH 840 comes standard with ventilation and heating systems and has optional air conditioning and a radio. The driver’s seat is air-suspended to increase comfort while working.
![Case IH 840 Technische Daten](http://ich-landwirt.com/wp-content/uploads/2023/04/case-ih-840.jpeg)
Mature
Here you will find a table with all important data about the tires of the Case IH 840 tractor.
Feature | Value |
---|---|
tire size front | 11.00-16 |
Rear tire size | 16.9-30 |
Tire type | bias tires |
Rim size front | 8 x 16 |
Rear rim size | 14 x 30 |
Front tire tread | Agricultural |
Rear tire profile | Agricultural |
Maximum permissible front tire pressure | 2.0 bar |
Maximum permissible rear tire pressure | 1.0 bar |
Recommended front tire pressure | 1.6 bar |
Recommended rear tire pressure | 0.6 – 0.8 bar |
The Case IH 840 is fitted with 380/85R24 tires on the front axle and 480/70R34 tires on the rear axle. The tractor has standard tire profiles and Michelin tires can also be used as an option.
Maintenance
It is important that the Case IH 840 tractor is serviced regularly to ensure long life and optimal performance. Here are some important points to pay attention to when servicing the tractor:
- Check the oil level regularly and change the oil according to the manufacturer’s instructions.
- Check the filters and replace them if necessary.
- Check tire pressure and make sure it meets manufacturer specifications.
- Check the brakes regularly and replace them if necessary.
- Keep the tractor clean and dry to prevent rust and corrosion.
Prices for spare parts
Here is a table with the prices of some important spare parts for the Case IH 840 tractor.
spare part | Price in euros |
---|---|
Oil filter | 15 € |
Air filter | €20 |
Brake pads (set) | €80 |
clutch disc | €250 |
water pump | €150 |
It is important to note that replacement parts prices may vary by retailer and region.
Operating experience
I have personally used the Case IH 840 tractor and have been very impressed with its performance and reliability. The tractor is very easy to operate and offers high lifting capacity and hydraulic power. The cabin is also very comfortable and offers good visibility. Overall I would recommend the Case IH 840 tractor to any farmer looking for a reliable and powerful tractor.
Comparison with other models
Here is a table comparing the main technical data between the Case IH 840 and four other models of the same brand.
model | Engine power | gear type | hydraulic system | lifting capacity | Weight |
---|---|---|---|---|---|
Case IH 840 | 81 HP | Synchronized manual gearbox | open center | 2,500 kg | 3,900 kg |
John Deere 5075E | 75 HP | SyncroPlus | Open center | 2,650 kg | 2,550 kg |
Massey Ferguson 5713 SL | 130 HP | Dyna-4 | Load sensing | 5,200 kg | 5,000 kg |
New Holland T4.75 | 75 hp | Synchro Command | Open center | 3,000 kg | 3,800 kg |
Kubota M7060 | 71 HP | Synchro Shuttle | Open center | 2,700 kg | 2,050 kg |
As the table shows, the Case IH 840 has slightly lower power than the other models, but it still has impressive lifting capacity and hydraulic performance.
Advantages and disadvantages
As with any tractor, the Case IH 840 has its pros and cons. Here are some important points to note:
Advantages
- High lifting capacity and hydraulic power
- Easy to use
- Comfortable cabin
- Good value for money
Disadvantages
- Lower performance compared to some other models
- No automatic steering
Cost
The price of a new Case IH 840 tractor varies by region and dealer. Currently, the average price for a new tractor is around 40,000 to 50,000 euros. Depending on age and condition, used models can cost between 15,000 and 30,000 euros.
FAQs
What type of fuel does the Case IH 840 tractor use?
The Case IH 840 tractor requires diesel as fuel.
Is the tractor cab air-conditioned?
The cab of the Case IH 840 tractor can optionally be equipped with air conditioning.
What is the maximum speed of the tractor?
The maximum speed of the Case IH 840 tractor is 40 km/h.
How often should the tractor oil be changed?
The Case IH 840 tractor oil should be changed according to the manufacturer’s instructions. As a rule, this should be done every 250 operating hours or once a year.
Does the tractor have automatic steering?
No, the Case IH 840 does not have automatic steering.