Case IH Farmall 65 A Specifications
The Case IH Farmall 65 A is a compact but powerful tractor model designed for agricultural applications. In this article, the specifications, features and experience of this model will be discussed in detail.
Case IH Farmall 65 A Specifications
Here you will find a detailed table with all technical data of the Case IH Farmall 65 A tractor:
| TECHNICAL DATA | SPECIFICATIONS |
|---|---|
| engine | FPT F5C, 3.4 L, 3-cylinder turbo diesel |
| Performance | 65 HP |
| Torque | 270 Nm |
| Transmission | 12 + 12 speed |
| hydraulic system | 41.8 l/min |
| Lifting power | 1,890 kg |
| Weight | 2,375 kg |
The Case IH Farmall 65 A has a 3.4 liter 3-cylinder turbocharged diesel engine with an output of 65 hp. The 12+12 speed gearbox enables precise control of the tractor. The hydraulic pump has a capacity of 41.8 liters per minute and the maximum lift capacity is 1,890 kg.
engine
Here are the key technical data of the Case IH Farmall 65 A engine:
| Characteristics | Technical data |
|---|---|
| Engine type | FPT F5C, 3.4 L, 3-cylinder turbo diesel |
| cooling | Water cooling |
| Performance | 65 HP |
| Torque | 270 Nm |
| Tank capacity | 57 L |
The Case IH Farmall 65 A engine is a 3.4-litre, 3-cylinder, 65-hp turbocharged diesel engine. It has a tank capacity of 57 liters and is water-cooled.
Reducers
Here are the main specifications of the Case IH Farmall 65 A reduction gears:
| Characteristics | Technical data |
|---|---|
| Number of gears | 12 forward and 12 reverse gears |
| clutch | double clutch |
| Lock differential | Electrohydraulic activation |
| Speed | 30 km/h |
The Case IH Farmall 65 A reduction gear has 12 forward and 12 reverse gears. It has a dual clutch and electro-hydraulic activation of the differential lock. The maximum speed is 30 km/h.
Power
Here are the main technical data of the features of the Case IH Farmall 65 A:
| Features | Technical data |
|---|---|
| Hydraulic system | 41.8 l/min |
| lifting capacity | 1,890 kg |
| PTO shaft | 540 rpm |
| Brakes | disc brakes |
| Steering | Hydrostatic steering |
Farmall 65 A has a hydraulic system with a capacity of 41.8 liters per minute and a maximum lift capacity of 1,890 kg. The PTO has a speed of 540 rpm and the tractor is equipped with disc brakes and hydrostatic steering.
Hydraulic system
Here are the technical data of the hydraulic system of the Case IH Farmall 65 A:
| Features | Technical data |
|---|---|
| Pump | 41.8 l/min |
| pressure | 200 bar |
| Connections | 2 x double-acting control circuit |
| Control | Mechanical or electro-hydraulic |
The hydraulic system of the Farmall 65 A has a pump capacity of 41.8 liters per minute and a maximum pressure of 200 bar. It has 2 double-acting control circuits and can be controlled mechanically or electro-hydraulically.
Dimensions and weights
Here are the dimensions and weights of the Case IH Farmall 65 A:
| Features | Technical data |
|---|---|
| Length | 3.70 m |
| Width | 1.85 m |
| Height | 2.30 m |
| Wheelbase | 2.13 m |
| weight | 2,375 kg |
The Farmall 65 A is 3.70 m long, 1.85 m wide and 2.30 m high. The wheelbase is 2.13 m and the weight of the tractor is 2,375 kg.
Cabin
The Farmall 65 A cab offers the driver comfort and a good view of the work. It has air conditioning and a comfortable seating position. The interior is spacious and offers enough space for the driver.
Mature
Here are the specifications of the tires on the Case IH Farmall 65 A:
| Characteristics | Technical data |
|---|---|
| Front tires | 280 / 70R18 |
| rear tires | 360 / 70R28 |
The front tires on the Farmall 65 A are 280/70R18 and the rear tires are 360/70R28.
Maintenance
Regular maintenance is essential to ensure optimum tractor performance. Here are the key points to look out for when servicing the Farmall 65 A:
- Check the engine oil level regularly and change the oil according to the manufacturer’s recommendations.
- Check the air filter and replace if necessary.
- Check the hydraulic fluid and top up if necessary.
- Check the brake pads and replace if necessary.
- Check the condition of the tires and replace them if necessary.
Prices for spare parts
The cost of spare parts may vary depending on the model and manufacturer. Here are some prices for Farmall 65 A spare parts:
- Oil filter: 15-20 euros
- Air filter: 25-30 euros
- Fuel filter: 20-25 euros
- Brake pads: 50-60 euros per axle
- Clutch disc: 150-200 euros
- Water pump: 100-120 euros
- Starters: 150-180 euros
It is important to compare the prices of spare parts and only buy quality parts from trusted dealers.
Operating experience
The Farmall 65 A is a reliable and powerful tractor, ideal for use on small to medium sized farms. The tractor is manoeuvrable and offers a good view of the work. The interior of the cab is spacious and offers the driver comfort during long working days. Operating the tractor is simple and intuitive.
Comparison with other models
Here is a comparison of the Farmall 65 A with four other Case IH models:
| Characteristics | Farmall 65A | Farmall 70A | Farmall 75 A | Farmall 80A |
|---|---|---|---|---|
| Performance | 65 HP | 70 HP | 75 HP | 80 HP |
| engine | FPT F5C, 3.4 L, 3-cylinder turbo diesel | FPT F5C, 3.4 L, 3-cylinder turbo diesel | FPT F5C, 3.4 L, 3-cylinder turbo diesel | FPT F5C, 3.4 L, 3-cylinder turbo diesel |
| hydraulic system | 41.8 l/min | 48.2 l/min | 48.2 l/min | 48.2 l/min |
| lifting capacity | 1,890 kg | 2,270 kg | 2,270 kg | 2,270 kg |
| Weight | 2,375 kg | 2,580 kg | 2,580 kg | 2,580 kg |
The Farmall 65 A has a power of 65 hp, while the Farmall 70 A, 75 A and 80 A have a higher power. However, the Farmall 65 A is lighter than the other models and is therefore more manoeuvrable. In terms of hydraulic system and lift capacity, the Farmall 70A, 75A and 80A models are slightly more powerful than the Farmall 65A.
Pros and cons
Advantages:
- Compact design and manoeuvrable, ideal for smaller farms and narrow fields
- Powerful and economical 3-cylinder turbo diesel engine with Tier 4 Final / Stage IV emissions standard
- Good maneuverability thanks to the mechanical shuttle
- Hydraulic pump with a flow rate of 44 liters per minute and a lifting capacity of up to 2,200 kg
- Independent PTO shaft with 540 and 540E rpm for flexible use of attachments
- Comfortable and clear cab with good all-round visibility
Disadvantages:
- The 12×12 gearbox can sometimes shift somewhat jerkily
- The ground clearance of 0.39 m can be problematic when working in difficult terrain
- The standard equipment is quite sparse, some important functions have to be added separately (e.g. the hydraulic control units)
- The price is slightly higher compared to other tractors in the same power class
costs
The price of a new Farmall 65 A is usually between 35,000 and 40,000 euros. Depending on age and condition, used models can cost between 20,000 and 30,000 euros. It is important to carefully inspect the condition of the tractor and take it for a test drive before making a used purchase.
FAQs
How often should the oil filter be changed?
The oil filter should be changed according to the manufacturer’s recommendations. As a rule, it should be replaced every 100 to 150 operating hours.
What type of fuel should the Farmall 65 A use?
The Farmall 65 A was designed to run on diesel fuel.
What is the maximum speed of the Farmall 65 A?
The maximum speed of the Farmall 65 A is 30 km/h.
How often should the hydraulic fluid be changed?
The hydraulic fluid should be changed according to the manufacturer’s recommendations. As a rule, it should be replaced every 1,000 to 1,500 operating hours.
Is the Farmall 65 A suitable for use on small to medium-sized farms?
Yes, the Farmall 65 A is ideal for use on small to medium-sized farms due to its maneuverability and performance.